Home page ꄲ Hardwares ꄲ Cast steel pull head Bo fork

b-7E7A3430

넳 넲

Cast steel pull head Bo fork

Cast carbon steel tie rod fork, alloy steel pull head, hot dip galvanizing, suitable for threaded M20-M100

Everyone is watching

Stainless Steel Forks Stainless Steel Forks

stainless steel forks,size from M10 to M90.

Expansion Shells

Expansion shells are used for fixing single-sided shuttering or similar structures in rock, concrete or comparable load-bearing ground.

Positioningcone Cone type anchor bolt

Positioning Cones are used to create anchorage points for climbing formwork, brackets or similar structures.
The taper anchor bolt is used in the climbing formwork system as a fulcrum and can be reused

ꄴPrevious： Cast Stainless Steel Pipe joint Stainless Steel Casting Pipe Fittings

ꄲNext： Expansion Shells

Size	Material	Surface
M10	G20Mn5 / 1.6220 QT	H. D.Galvanized
M12	G20Mn5 / 1.6220 QT	H. D.Galvanized
M16	G20Mn5 / 1.6220 QT	H. D.Galvanized
M20	G20Mn5 / 1.6220 QT	H. D.Galvanized
M24	G20Mn5 / 1.6220 QT	H. D.Galvanized
M30	G20Mn5 / 1.6220 QT	H. D.Galvanized
M36	G20Mn5 / 1.6220 QT	H. D.Galvanized
M42	G20Mn5 / 1.6220 QT	H. D.Galvanized
M48	G20Mn5 / 1.6220 QT	H. D.Galvanized
M56	G20NiMoCr4 / 1.6750 QT	H. D.Galvanized
M64	G20NiMoCr4 / 1.6750 QT	H. D.Galvanized
M76	G20NiMoCr4 / 1.6750 QT	H. D.Galvanized
M85	G20NiMoCr4 / 1.6750 QT	H. D.Galvanized
M90	G20NiMoCr4 / 1.6750 QT	H. D.Galvanized
M100	G20NiMoCr4 / 1.6750 QT	H. D.Galvanized

Other sizes and materials available upon request!